- Mold tooling
- Mould steel
- Plastic Material
- Delivery time
- Payment terms
- Yunpeng advantage
- Yunpeng mould advantage 2
- 3D Drawing Format
- Yunpeng Certificate
- Manufacture plastic parts
- 3 D Printing
- Delivery Terms
- Die casting
- Mold Wiki
- Mold Layout/Design
- Mold Layout Design
- do you know about" Injection molding"
- Mold Structure
- Mold problems
- Hot Runner
- Two shot plastic injection molding
- Parting Line
- How to Determine Parting Line of mold products?
what will influnce price for injection mould tooling?
It depends on a lot of factors. A mold can cost from several thousand to hundreds of thousands of dollars, and the most important factors that affect the price of the mold are the complexity of the part that will be produced from the mold, the size and the number of cavities. In addition, we also need to consider more about some other factors such as the injection system (Hot Runner or Cold Runner), geographic location of suppliers, or some other requests...
We are all clear that if a plastic injection has higher levels of complexity, larger size, it will have a higher price for processing than simpler and smaller-sized molds. Besides, the number of cavities that you want will also affect the cost of the mold. Multiple cavities, the mold will be larger, and need more materials, or processing will also take more time and fee.
Mold Base Standard If you do not give specific requirements for Mold Base Standard, when you compare the price of the suppliers you should also pay attention to this. Also,type of steel that is used to make the mold also affects the cost. So, if you want a good standard mold, high quality, it is clear that the cost will be higher, which also means that will help you get high quality products, less faulty in the manufacturing process, and the mold life will also be higher.
A feature that cannot be produced from the mold in the straight open and shut direction will require a moving part added to the tool. Some of these moving sections are referred to as sliders, collapsible cores, and unscrewing molds. Each of these moving parts makes the tool bigger or more complicated, of course, that will require more work and ultimately increase the cost.
Hot Runner or Cold Runner .Using Hot Runner or Cold Runner in Injection system will also affect the price of a mold. Obviously we all know that Hot Runner is different from Cold Runner, and the cost is also different.
Surface finish. If the surface finish is not critical then a machined finish may be acceptable — this does not require secondary finishing thus reducing the time and cost to produce the tool. Hand polishing takes time and effort and has to be built into the cost of the tool.
Geographic location of mold suppliers. According to an evaluation, choosing to buy injection manufactured in China will help you save cost up to "40% compared with a typical tool price from Europe or the USA". However, you should also consider the expenses of travelling to the factory to ensure tools are built correctly. Of course, there is another choice for that is to choose third party company, which can help you audit the process and inspect tooling.